Cuanbo MVP-16C, User Manual, Page: 5 / 47

MVP-16C signal management platform use hot plug input/output card slots; Slots 1
3 ~ 16 are fixed to output, slots 1 ~ 12 are configurable for input or output.
MVP-32C signal management platform use hot plug input/output card slots; Slots 2
5 ~ 32 are fixed to output, slots 1 ~ 24 are configurable for input or output.
(1) Switch a input to all output channel
Simply choose the Video input and touch the screen interface: touch <Input channe
l number> + <TO All> button, input channel number will be displayed in the top lef
t corner angle of the output channel.
for example , <IN6> + <TO All> key
，
Switch successful, at the upper left of the ou
tput channel Angle IN4 will be shown.
(2) Switch any one input to any or all output channels
Select a input and switch to any output channel. For example , IN4 + OUT7 + OU
T9 + OUT15 + OUT16. Switch successful, IN4 will be shown at the upper left of t
he output channel angle.
(2) Close the output channel
MVP-8C(N)/MVP-16C/MVP-32C signal management platform provides a function of
closing a channel output or multiplex channels output, output channel which was cl
osed will have no signal output. If users need to close an output channel, just clic
k the close button on touch screen, choose the corresponding channel. When close
channel successfully, the output interface on touch screen will become gray, the u
pper left corner input channel number is 00. Such as the figure below.
(3) Check the output channel state
MVP-8C(N)/MVP-16C/MVP-32C signal management platform provides a function of
checking all channels status. Can be View the output channel video switching status,
Audio switching status, EDID input channel switching status and output channel
identification EDID status, display equipment in Video interface and so on.
For example, audio switching state.