CTX S762A, Service Manual, Page: 10 / 19

C
C
C
T
T
T
X
X
X
Service Manual
S762A
10
Level 1 Level 2 Level 3 Level 4
Direct Adj Brightness
Direct Adj Contrast
*Direct Adj *Audio
Mute
*Volume *Adjustment scale
Auto Tune
Auto Color
9300° K
6500° K
Color
User R/G/B select Adjustment scale
Clock Adjustment scale
Phase Adjustment scale
H-Position Adjustment scale
V-Position Adjustment scale
Image
Smooth On/Off
English(select)
German(select)
French(select)
Spanish(select)
Italian(select)
Language
中文
(option)
H-Position Adjustment scale
V-Position Adjustment scale
OSD Position
Center
Main Menu
Reset Yes/No
Note:* means S762A/S761A/S760A only
3.6.5 Accessory OSD Indications
Signal out of range An input signal which is outside the range defined in
Section 3.4 shall cause the monitor to display a message
Signal Out of Range .
No Signal Input and power down.
When the signal cable is not plugged into PC or when the
horizontal or vertical sync are absent and when the
monitor is turned on. After 5 sec isn’t to detect H or V Sync
then show “
No Signal Input ” for 5 seconds and then show ”
Power down ” message on screen 2 sec. And then the
monitor shall go to power saving status. If first turn on the
monitor, shows
“No Signal Input” 30 sec.
3.7 Power Management