English
7
Start Your Installation
Notice:
To ensure the LCD display can work well with your computer,
please configure the display mode of your graphic card to make it
less than or equal to 1280 x 1024 resolution and make sure
timing of the display mode is compatible with the LCD display.
We have listed the “Compatibility Modes” of this LCD display in
appendices for your reference.
* For Macintosh, use the Mac adapter.
VGA Cable
Power Adapter
Power Cord
Mac Adapter *
"
Connecting the Display
To setup this display, please refer to the following figure and procedures.
1. Be sure all equipment is off.
2. Connect the VGA signal cable from display input-A or display input-B
connector to the 15-pin connector of your host computer and tighten the
screws.
3. Connect the DC power cord to the power connector; plug one end of the
AC power cord into the power adapter, and then the other end into an
electrical outlet.
