O P E R A T I N G I N S TR U C T I O N S
L A N D W A R R I O R B A T T E R Y
T E S T E R / A N A L Y Z E R
P E-B T- 0 3
Creating Technology Solutions, LLC
|
P.O. Box 5827
|
Titusville, FL 32783
Tel 321-418-3055
|
Fax 321-418-3044
|
www.crtes.com
|
CAGE Code: 6Y7W5
©2014 Creating Technology Solutions
|
All information subject to change without notice
|
April 2014
|
Rev.02
The information contained herein is for reference only and does not constitute a warranty of performance
CTS IS AN AUTHORIZED RESELLER AND DISTRIBUTOR FOR PATCO ELECTRONICS
Connecting to Batteries
Batteries can be connected to the PATCO PE-BT-03
tester/analyzer by using the docking station with cable, or
without docking station if battery has the LEMO type
connector, or with an optional LEMO to Glenair cable
adapter if battery has the Glenair type connector.
Note:
The LEMO to LEMO connector is used to connect the
tester/analyzer to the testing docking station.
Handling
The PATCO PE-BT-03 battery tester and docking station
needs certain considerations when handling or in use. Do
not expose it to moisture, water, sand, dirt or rough
handling. If the inside of the tester docking module
becomes dirty, clean with a pressurized air can.
Optional cable to connect PE-BT-03 directly to a
battery with a Glenair type connector.
PATCO P/N: PE-CC-BTG-01
LEMO
Glenair
Supplied docking station with
PE-BT-03 tester/analyzer.
PATCO P/N: PE-BTL-DS
Supplied cable to connect PE-BT-03 to docking
station. This cable can also be used to connect
directly to a battery with a LEMO type
connector.
PATCO P/N: PE-CC-BTL
PATCO P/N: PE-CC-BTL
LEMO
LEMO
LEMO