62
Cold Start Trap:
Enable or disable the CHASSIS to send the cold start trap.
Warm Start Trap:
Enable or disable the CHASSIS to send a trap after a system reset.
Authentication Failure Trap:
Enable or disable the CHASSIS to send the Authentication
Failure trap when any unauthorized login attempts are made.
Module Port Link Up/Down Trap:
Enable or disable the CHASSIS to send the module port
link up/down traps.
Fan Trap:
Enable or disable the CHASSIS to send a trap when the fan is not working.
System Power Down Trap (the 1
st
destination only):
Enable or disable the port power-
down trap notice sending.
Digital I/O Start Trap:
Select Disabled or Enabled for the SNMP trap
.
Click the
“OK”
button to apply the settings.
4.3.9 Mal-attempt Log Configuration
Click the option
Mal-attempt Log Configuration
from the
Network Management
menu
and then the following screen page appears.