13
3. OPERATION
The WLAN Residential Gateway is Plug & Play compliant. Real-time
operational status can be monitored through a set of LED indicators located on
the top panel. A built-in management module provides users with flexible
interfaces to configure, control and monitor the complete system remotely.
3.1 LED Definitions
LED
Color
Operation
Power
Off
Power is off.
Green
Power is functioning normally.
STATUS
Green
System is ready.
Orange
System is not ready.
Orange blinking
Insert a pin or paper clip to press the Reset button
for 3 seconds to restart the device. The STATUS
LED will blink in orange once.
Insert a pin or paper clip to press the Reset button
for 10 seconds to reset the device to factory defaults.
The STATUS LED will blink in orange three times.
WAN
Off
The port link is off or it is up in 10Mbps.
Green
The link is up and works at 100Mbps.
Orange
The link is up and works at 1000Mbps.
Blinking
The traffic is present.
LAN 1
Off
The port link is off or it is up in 10Mbps.
Green
The link is up and works at 100Mbps.
Orange
The link is up and works at 1000Mbps.
Blinking
The traffic is present.
LAN 2
Off
The port link is off or it is up in 10Mbps.
Green
The link is up and works at 100Mbps.
Orange
The link is up and works at 1000Mbps.
Blinking
The traffic is present.
LAN 3
Off
The port link is off or it is up in 10Mbps.
Green
The link is up and works at 100Mbps.
Orange
The link is up and works at 1000Mbps.
Blinking
The traffic is present.
LAN 4
Off
The port link is off or it is up in 10Mbps.
Green
The link is up and works at 100Mbps.
Orange
The link is up and works at 1000Mbps.
Blinking
The traffic is present.
Wi-Fi
Off
WLAN link is off.
Green
WLAN link is up
Green blinking
The traffic is present.
WPS
Off
WLAN link is off.
Green
WPS is searching for the WPS client.
