CTP Systems dBbox3 Manual Download

Page: 14 / 17

More/More/Setup

This page enables the user to set metering preferences, adjust the display contrast

and to personalize the dBbox3 so when switched on it will display, for example, your

name and phone number.

More Setup Ana_meter>

Select all analogue metering to PPM or

VU Meter scale and ballistics.

More Setup AES_meter>

Select both AES BNC and AES XLR

inputs to PPM, VU, -18dBFS or -20dBFS

Metering.

More Setup SPDIF_meter>

Select SPDIF input to PPM, VU, -18dBFS or

-20dBFS Metering.

More Setup Contrast>

Adjust the contrast of the display.

Range 0 (lowest) to 9 (highest).

More Setup Headphones>

Set the headphone output to mono or stereo.

More/Setup/More Setup

More More Setup MoreSetup PPM top scale>

Select top scale of PPM to

UK, dB or EBU.

More More Setup MoreSetup Spkr ana limit>

Switches the speaker

limiter on and off. Select

to off for more level on the speaker but note that the battery may be working very

hard, especially on loud audio peaks which may have undesirable effects on the

function of the display or the box itself. Recommended setting is on.

Summary of Contents for dBbox3


















Search results

Summary of Contents for dBbox3

Reviews:

Related manuals for dBbox3

Brands by name

Popular brands

CTP Systems dBbox3, Manual

Search results

Summary of Contents for dBbox3

Reviews:

Related manuals for dBbox3

Brands by name

Popular brands