8
Output> AES BNC
Noise Generator
Output>
Select to left, right or
Both outputs.
Output> AES BNC
Noise Generator
OP listen>
Switch to ‘on’ to enable
the internal speaker and
volume control for
confidence monitoring.
Phantom power measurement
Phantom
Connect your phantom mic cable to Ana Out L. Phantom power will be measured on
both live and neutral (XLR pins 2 and 3) with a tolerance of +- 1 volt.
Four Wire Box
4 Wire Box
This feature is analogue only.
The dBbox2 will act as a four wire box using the internal microphone and speaker or
headphones. Listen to incoming audio and adjust the volume using Vol- and Vol+.
Up. If the speaker is in use it will cut on talk to prevent feedback, the headphones
will not.
Press the down arrow to speak on the internal mic. The microphone passes through
a limiter, the threshold of this limiter is set by
Output> Analogue Int.mic Limiter>
Signal conversion
In/Out/FX
This page allows conversion of audio signals with the addition of a limiter, gain
adjustment and equalization. Note that only 48kHz AES signals may be used in this
menu.
In/Out/FX
Input>
Available inputs Analogue, AES BNC, AES
XLR and SPDIF.