CTP Systems CTPhone 1900, Applications Manual

Page: 65 / 132

DOC00101-01 3-17
CTPhone 1900 System Hardware & Software Installation
Connecting a Personal Computer to a CTPhone Controller
CTPhone Manager software accompanying the CTPhone Controller lets a
system administrator configure CTPhone extension and telephone feature
operation on the CTPhone Controller. This software runs on a personal
computer (see specifications in Table 3-F on page 3-19). Figure 3-12 illus-
trates the connection between the CTPhone Controller and personal com-
puter.
Figure 3-12. CTPhone Controller to Personal Computer Cable
5 Replace the CTPhone Controller cover and reinstall cover
screws.
6 Power on the CTPhone Controller.
+
Connecting a Personal Computer to the CTPhone Controller
Step Procedure
1 Insert one end of the CTPhone Controller personal computer
cable in connector J2 of the CTPhone Controller.
Figure 3-13. CTPhone Controller RS-232-C Connection
+
Installing an Analog Line Module in the CTPhone Controller
CTPhone
RS-232-C
RJ45
* A female to female DB9 adapter or DB25 adapter is available for
connection to the PC.
connector
RJ45 connector
with adapter*
Controller
P1 P2 J2 J3 J1
RJ45
25-pair female connectors
-48 VDC
input
(to analog lines and base stations)
not
used
GND
power cord strain relief
(admin port)