Instruction Booklet
HS-328
12
CARE AND MAINTENANCE
1.Before using the mobility scooter, make sure all nuts and bolts are tighten. Check any
parts for damage or wear and replace it if needed. Check all parts for correct placements
and adequate adjustments.
2.Ensure that batteries are well maintained and charged as instructed in page nine in this
manual.
3.The wheels and tires should be checked periodically for cracks and wear, and should
be replaced by a qualified technician.
4.Regularly check for loose nuts and/or bolts in the front and drive wheels. If loose, have
them adjusted by a qualified technician.
5.Clean diet, dust and grease from exposed components.
6.Periodically have the bearings of the front wheel checked to make sure they are clean
and free from rust or moisture hazards.
Recommended maintenance procedures :
Before cleaning the mobility scooter, be reminded the following tips:
‧
Only use a damp cloth and gentle detergent.
‧
Do not apply any abrasive or acidic substances during cleaning of scooter, to avoid
damages to scooter.
‧
Do not use high-pressure hose and pipe to clean your scooter.
‧
Do not allow any direct contact with water for all of the electrical parts of this scooter.
Cleaning your mobility scooter :
