CTM ETRIKE-LI 26/24 Owner'S Manual Download Page 4

4  

Page 4 

                       CHARGING 

YOU MUST ONLY USE THE CHARGER THAT WE 
SUPPLY WITH TRICYCLE 

ONLY USE IN A DRY, WELL-VENTILATED 
 ENVIRONMENT.

 

With the lead unplugged from 240v power supply plug into point 
located on right-hand side of battery. Plug into standard 240v 

household power supply and switch on. You will see a red light on 
charger, this indicates the unit is on and charging the battery. When 

charged light will change to green and charger will switch and go into 
maintenance mode. It is alright to leave it in this mode for a short 
period of time but we recommend that you turn it off and unplug from 

power point and bike after 12 hours. 
 

REMEMBER ALWAYS SWITCH OFF AT POWER POINT BEFORE 

PLUGGING OR UNPLUGGING FROM TRICYCLE 

MAXIMUM BATTERY LIFE WILL BE ACHIEVED BY CHARGING EVERY  
DAY AFTER BEING USED. BATTERIES LEFT IN A SEMI-DISCHARGED 

STATE COULD PREMATURELY FAIL. 
 

Using the Handbrake Lock

 

The handbrake lock can be 
used to keep brakes 

persistently on while you are 
not holding the handbrake. 
 

To engage the handbrake 
lock, while holding the 
handbrake on, push the 

handbrake lock down and 
release the handbrake. The 
lock should keep the 

handbrake on without you 
holding it. 
 

To release the handbrake lock, simply squeeze the handbrake on. The 
lock should return to its disengaged position automatically. 

9  

Reviews: