NB! If none of this helps, turn the fuse for
the stove off and on.
You will then have power for the stove for
24 hours. Contact your electrician, and
he will sort out the issue.
LED
Control button
Beeper
Alarmsituations
1012
Alarm
Too high temperature
Alarm indication
Three beeps every 5 seconds for 40 seconds (and flashing
of red LED).
Measure
Press control button - gives five minutes to ”fix” the problem
/ change status.
Alarm
Timing Alarm (After 2 hours of use)
Alarm indication
One beep every 30 seconds for 5 minutes before
disconnection.
Measure
Press control button - provides 30 new minutes of
operation.
Alarm
When the stove / cooktop is without power
Alarm indication
Stove / cooktop is ”dead”.
Measure
Press control button (Note: If this does not work, replace the
battery. See below).
Alarm
In the need of battery replacement
Alarm indication
Two beeps every minute.
Measure
Pull the sensor against you (releasing it from the bracket).
Remove the two screws in the bottom cover, and replace
batteries (Two AAA-batteries). To ensure operation you have
15 minutes to replace batteries.
Applies only to Mkomfy 16R/25R (wireless model)
Quickreference for stove guard
manufacturer
CTM Lyng AS
Tel: +47 72 83 16 11
http://www.ctmlyng.no