COM Express® PMC/XMC Lite Carrier
Users Guide
Document:
CTIM-00440
Revision:
0.04
Page 27 of 29
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date:
2017-09-11
Typical Hardware Installation Procedure
1.
Ensure all external system power supplies are OFF.
2.
Install the necessary cables for the application. At a minimum, this would include:
a)
Power cable to the input power connector
b)
Connect a video display cable
c)
Keyboard and mouse via USB
d)
SATA or mSATA hard drive
For additional information on the relevant cables, please see the Cables and Interconnects section of this
manual.
3.
Connect the power cable to power supply
4.
Ensure your power supply is in the range of +12V to +48V DC
5.
Switch ON the power supply. DO NOT power up your system by plugging in live power.
On-board Indicator LEDs
The CCG016 has 10 on-board indicator LEDs.
LED
Description
D15
+VIN
D36
+12V
D37
+5V
D38
+3.3V
D32
+1.2V**
D13
+1.5V
D14
+1.8V
D39
+5V Standby
D40
+3.3V Standby
D19
POWER
D1
SATA ACT#
D7
GBE ACT#
D8
GBE LINK
** D32 Only on when on-board NAND option is implemented.
