56
CTI Janus Programmable Automation Controller IOG
8.3.6
Firmware Update
This page provides a method to initiate a
Remote Firmware Update
for the Janus controller. For more details, see
Section 6.3
•
[R
EFRESH
] pushbutton is used to recheck the controller C operational status.
•
[B
ROWSE
] pushbutton displays a File Explorer window when pressed. This allows navigation through
PC/Network drives to select the Firmware Update file to download..
•
[U
PDATE
F
IRMWARE
] button initiates the firmware update process when pressed. All interlocks (User Switch 1
position, Warning Acknowledgement checkbox, and PLC operational state) must be met before firmware
update process will start.
NOTE: The
Remote Firmware Update
procedure can be cancelled any time prior to pressing the [U
PDATE
F
IRMWARE
] pushbutton by selecting a different web page or closing the browser window. Once the button is
pressed, firmware update will continue until successful completion or error.
•
[S
TATUS
] window that provides information on the current state of the firmware update process.
8.3.7
Product Reset
This page provides a method to remotely the reset of the Janus controller. Remote reset is allowed only when
module Switch 5 is in the C
LOSED
position. The following resets are allowed:
•
Clear Exception
•
Reset Configuration Settings
•
Restore Factory Defaults
for description of reset options.
NOTE: The connection to the PLC web server will be lost after any of the above actions are taken. Any action other
than ‘
Clear Exception
’ will force the PLC to lose its IP
address.
