CTI Janus Programmable Automation Controller IOG
51
CHAPTER 8
EMBEDDED WEB SERVER
The product embedded web server displays information about the operation of the Janus controller and provides a
means to configure product operation. The web pages are described in the following sections.
8.1
Product Information
This page provides information about the controller
•
Product Number
•
Product Name
•
Serial Number
•
Manufacture Date
•
Module Identifier:
Assigned by user in General Settings page
•
Hardware Configuration: D
esignator that allows software to determine hardware compatibility
•
Firmware Version
•
Firmware Date
•
FPGA Version
•
Build Information 1 & 2:
( CTI development and support information)
•
Clock Synchronization Mode
: Determines how the controller clock is set)
•
Startup Mode
: Determines how the controller starts up when reset or powered up
•
Front Panel SD Card Status
: If inserted, displays Utilization Percentage
•
DNS (Domain Name Service) Address Method
(Auto/Manual)
•
Primary DNS Server IP Address
•
Secondary DNS Server IP Address
•
Domain suffix
•
H
TTPS Basic Authentication Enabled:
Authentication for webserver access
•
HTTPS Encryption Enabled:
Encryption of web server traffic
•
Ethernet MAC Address
•
Internal Switch Mode
•
CPU Temperature (° C)
•
Dipswitch Settings
•
User Jumper Selections
•
Network Settings: For Primary and Alternate subnets
