CTEK Z4200, User Manual, Page: 6 / 63

14 November 2014
2
2) Wireless Interface
a. Enable/Disable WAN Interface
b. Enable/Disable inbound IP requests
c. DDNS Interoperability with Ctek's enhanced UDP interface
d. DDNS Interoperability with BIND or MS Server
e. SkyCloud visual DDNS (introduced in 4.2)
f. Advanced cloud based network management (introduced in 4.2)
g. Administration web server port address selection
h. Enhanced network activation (Z4200)
i. Home Network Selection
j. Time source selection (Network, NTP, or GPS)
3) RS232 (DB9 serial port)
a. Configurable Bit Rate
b. Configurable for Start/Stop Bits, Flow Control, and Parity
c. Local and remote Telnet Access
d. TCP/UDP Packet Assembly and Disassembly (PAD) function.
e. PPP Interface
4) RS485 Auxiliary Serial Port
a. Configurable Bit Rate
b. Configurable for Start/Stop Bits, Flow Control, and Parity
c. TCP/UDP Packet Assembly and Disassembly (PAD) function.
5) USB Host Connection
6) Relay Contact Closure (detection and operation)
a. NO/NC detection
b. SMS or email cry out alarm
7) Relay Driver Output ( Maximum sink current 200ma @24V)
a. SMS Activation
b. Web Activation
8) Tunneling
a. GRE Tunneling
b. IPsec
9) General Administration
a. Modify User and Password
b. Additional Users
c. Additional levels of authorization
10) Status – Ethernet Status
a. Currently Assigned IP Address
b. Current MAC Address
11) Wireless Status – CDMA or HSPA/UMTS Status
a. ESN or IMSI
b. Network Assigned IP Address
c. Telephone Number (MIN) or MSISDN
d. Current Network Status Active/Inactive
e. Signal Level (RSSI)