Installation manual CHARGESTORM® Connected
1
Introduction
This document shows how to install and use the charge station CHARGESTORM® Connected.
Figure 1 CHARGESTORM® Connected
1)
Front panel
2)
Display with charging status symbols
3)
Back cover
4)
Technical box
5)
EV connector (outlet or cable)
The manual is valid for the CHARGESTORM® Connected family. Model information is found on the
top of the technical box. For a complete list of article numbers, please download datasheet at
2
Safety
✓
Only accredited electrician is allowed to perform the installation described in this document
✓
Read and follow the instructions in this document before installation and usage of the product
✓
Installation must fulfill local safety regulations
3
Delivery content
Part of delivery
✓
Charging station
✓
Installation and user manual
✓
Two keys for opening CHARGESTORM® Connected
✓
Cover for cable inlet (M32 and M12).
✓
Holder for charging gun (In case charging station is equipped with fixed cable)
To bring
✓
4 pcs screws (M8) for wall mounting. Select screw type depending of wall.
✓
4 pcs of rubber seal/gaskets to use with screw.
–
Note very important!
✓
RFID-tag (in case RFID shall be used) of type Mifare Classic/ IEC 14443 Type A. RFID-tags can
be ordered from CTEK E-Mobility web-shop (
Option
✓
CHARGESTORM® Connected pole mount kit for pole diameter 60 mm. Article number 920-
00010.
