background image

8 • EN

TECHNICAL SPECIFICATIONS

Model number

1087

Rated Voltage AC

220–240VAC, 50–60Hz

Charging voltage

14.4V, 

 15.8V,  

 14.2V

Min battery voltage

Lead-acid: 2.0V, Lithium: 5.0V

Charging current

2.3A max

Current, mains

0.3A

rms

 (at full charging current)

Back current drain*

<1.5Ah/month

Ripple**

<4%

Ambient temperature

-20°C to +50°C

Charger type 

8 step, fully automatic charging cycle

Battery types

All types of 12V Lead Acid batteries (WET, MF, Ca/Ca, AGM, 

GEL)

12V (4cells) Lithium batteries (LiFePO

4

, LiFe, Li-iron, LFP)

Battery capacity

5–25Ah

Dimensions

168 x 65 x 38mm (L x W x H) 

Insulation class

IP65

Weight

0.6kg

*) Back current drain is the current that drains the battery if the charger is not connected to 

the mains. CTEK chargers has a very low back current.

**) The quality of the charging voltage and charging current is very important. A high cur-

rent ripple heats up the battery which has an aging effect on the positive electrode. High 

voltage ripple could harm other equipment that is connected to the battery. CTEK battery 

chargers produce very clean voltage and current with low ripple.

LIMITED WARRANTY 

CTEK SWEDEN AB, issues this limited warranty to the original purchaser of this product. 

This limited warranty is not transferable. The warranty applies to manufacturing faults 

and material defects for 5 years from the date of purchase. The customer must return the 

product together with the receipt of purchase to the point of purchase. This warranty is void 

if the battery charger has been opened, handled carelessly or repaired by anyone other 

than CTEK SWEDEN AB or its authorised representatives. One of the screw holes in the 

bottom of the charger is sealed. Removing or damaging the seal will void the warranty. 

CTEK SWEDEN AB makes no warranty other than this limited warranty and is not liable 

for any other costs other than those mentioned above, i.e. no consequential damages. 

 Moreover, CTEK SWEDEN AB is not obligated to any other warranty other than this 

warranty.

SUPPORT

 

CTEK offers a professional custom support: 

www.ctek.com

.  

For latest revised user manual see www.ctek.com. By e-mail: 

[email protected]

,

  

by telephone: +46(0) 225 351 80, by fax +46(0) 225 351 95.

50020345B

Summary of Contents for 1087







Reviews: