VDSL2 Manual
18
7. Configuration Interface of the Router
This section explains how to configure the router section of the VDTU2-104 & 204
Modem using its web-based
configuration.
The parts of the circuitry as well as the router configuration menu has been ported
from that of the reference kit to the VDTU2-104 & 204 Modem reference board. As
for the menu, There are only a few differences:
‧
The “adm1” port now is the port to the VDSL2 side. The port on the LAN is “adm0”.
It supports four Ethernet connections.
‧
The IP addresses are used in this chapter are different from the examples in the
previous chapters.
‧
The password used in this chapter is different from the examples in the previous
chapters.
‧
The VDTU2-104 & 204 Modem of course has no menu option for VDSL settings.
The VDTU2-104 & 204 Modem has a VDSL menu which is described in Chapter
6. Also the entry menu (Chapter 4.2) has different “looks” tailored to the
VDTU2-104 & 204 Modem.
7.1 Logging on to the VDTU2-104 & 204 Modem
To log on to the VDTU2-104 & 204 Modem Web Application, you must have a valid
password. The Administrator creates the log on user with its password. When you
log on to the VDTU2-104 & 204 Modem Web Application, the USER LOGIN window
is displayed as shown in Figure 7.1.
Figure 7.1 VDTU2-104 & 204 Modem Web Application
In the USER LOGIN window:
1. Enter the password in the Password text box. For an Admin user, the default
password is “admin”.
2. Click LOGIN to begin the configuration or click CANCEL in the USER LOGIN
window to cancel this log on operation.
