G.shdsl Router User Manual
Attrib
command can configure RIP mode, authentication type and Poison reverse mode.
Version
command can configure RIP protocol version.
Authe
command can configure authentication code.
You can review the list of RIP parameters via
list
command.
LAN
LAN interface parameters can be configured LAN IP address, subnet mask and NAT network type.
>> address
LAN IP address and subnet mask
attrib
NAT network type
IP share
You can configure Network Address Translation (NAT), Port Address Translation (PAT) and
Demilitarized Zone parameters in
ip_share
menu. Move the cursor “
>>
” to
ip_share
then press
enter.
>> nat
Configure network address translation
pat
Configure port address translation
dmz
Configure DMZ host function
NAT (Network Address Translation) is the translation of an Internet Protocol address (IP address)
used within one network to a different IP address known within another network. One network is
designated the inside network and the other is the outside. Typically, a company maps its local
inside network addresses to one or more global outside IP addresses and reverse the global IP
addresses of incoming packets back into local IP addresses. This ensures security since each
outgoing or incoming request must go through a translation process, that also offers the
opportunity to qualify or authenticate the request or match it to a previous request. NAT also
conserves on the number of global IP addresses that a company needs and lets the company use
a single IP address of its communication in the Internet world.
DMZ (demilitarized zone) is a computer host or small network inserted as a “neutral zone”
between a company private network and the outside public network. It prevents outside users from
getting direct access to a server that has company private data.
NAT
You can configure NAT parameters in
nat
menu.
>> virtual
Virtual IP address pool
global
Global IP address pool
fixed
Fixed IP address mapping
92
