3
5. Hardware Installation
1. Connect the SDSL cable, as (1) indicated in Figure 3, to the
LINE port of RJ-11 socket.
2. Use a RJ-45 cable, as (2) indicated in Figure 3, to connect
the
SDTU-01/ET10
to the LAN or a PC with Ethernet adapter
installed.
Note
: Be sure to use RJ45 crossover cable while
connecting to a hub.
3. Plug in the AC adapter to the AC power socket, then
connect the DC jack, as (3) indicated in Figure 3, to the DC
inlet of the
SDTU-01/ET10
.
4. Use a 9-pin RS232 cable as (4) indicated in Figure 3, to
connect the Console Port to a serial port of a terminal such
as PC with data terminal emulation software (Hyper
Terminal) installed, in order for local management.
Figure 3: Hardware Installations
(1)
(2)
(3
)
(4)
SDSL outlet
Management Terminal