9
Electrical Connectons
Cables enter and exit the enclosure through conduit fittings or cord grips on the
bottom of the unit . All input and output wiring is connected to the terminal blocks
and signal conditioners inside the unit . Inputs are routed through a conduit fitting
or cord grips (one per channel), output wiring is routed through a conduit fitting .
110 V
ac
is needed to power the unit through the terminal on the right side of the
enclosure . A ½ in . conduit fitting is provided for AC power entry .
Note:
If utilizing cord grips for cable entry, ensure that all cord grip entries are
used, or that unused grips are plugged . Empty cord grips provide a path for
contaminates to leak into the enclosure and cause malfunctions .
Figure 8. Bottom View
Figure 7. Front View
