42
CHAPTER 3
INTRODUCTION TO CLI
3.8.47 # terminal width
Syntax:
# terminal width <0 or 40-512>
Parameters:
<0 or 40-512>: Specify the width displayed on the screen. “0” means unlimited width.
Explanation:
Set up terminal display width.
Show: >
show terminal
#
show terminal
Negation:
# no terminal width
3.8.48 # no port-security shutdown
Syntax:
# no port-security shutdown [interface (<port_type>[<v_port_type_list>])]
Explanation:
Reopen ports that are shutdown or disabled by Port Security function.
Parameters:
[interface (<port_type>[<v_port_type_list>])]: Specify the port type and port numbers that you want to reopen.
3.8.49 show commands
In Exec mode, “show” commands can be issued to display current status or settings of a certain command. They
will be introduced in Section 3.9 “Commands in Config Mode”.
3.9 Commands in Config Mode
3.9.1 (config)# aaa authentication login
Syntax:
(config)# aaa authentication login { console | telnet | ssh | http } { { local | radius | tacacs } [ { local | radius |
tacacs } [ { local | radius | tacacs } ] ] }
Explanation:
Configure the authentication method for the client.
Parameters:
{ console | telnet | ssh | http }: Specify one of the authentication clients.
{ { local | radius | tacacs } [ { local | radius | tacacs } [ { local | radius | tacacs } ] ] }: Specify one of the
authentication methods for the specified client. At least one method needs to be specified. Users can specify
three methods at most.
local:
Use the local user database on the switch for authentication.
radius:
Use remote RADIUS server(s) for authentication.
Summary of Contents for MSW-4424C Series
Page 1: ...1 MSW 4424C MSW 4424CS L2 Gigabit Carrier Ethernet Switch ...
Page 382: ......
