CTC Union ET100/G64, User Manual

Page: 13 / 20

ET100/G64 LAN-WAN Bridge
13
1.6 DIP Switch Setting Tables:
1.6.1 Data Rate Settings:
The
ET100/G64
is designed for a fixed data rate of 64Kbps.
SW2 SW STATE Function
1-8 Reserved
Table 1: DIP settings for Data Rate.
1.6.2 Interface Settings:
SW3 SW STATE Function
OFF Timing recovered from received data on codirectional interface
1
ON Timing from Internal 64KHz oscillator
OFF AIS is disabled (default)
2
ON Transmit AIS [all 1's] when receive signal is lost
OFF Transmit Octal code violation (default)
3
ON Transmit without code violation
4-8 Reserved
Table 2: DIP settings for Co-directional Interface Configuration.
1.6.3 LAN Bridge Settings:
SW4 SW STATE Function
-1 -2 Memory Buffer configuration
OFF OFF LAN to WAN 308 packets, WAN to LAN 32 packets (default)
OFF ON LAN to WAN 170 packets, WAN to LAN 170 packets
ON OFF LAN to WAN 32 packets, WAN to LAN 308 packets
-1,-2
ON ON Reserved
OFF MDI [1:1 to HUB]
-3
ON Auto MDIX (default)
OFF Ethernet Speed 100Base-TX
-4
ON Ethernet Speed 10Base-T
OFF Ethernet Full Duplex
-5
ON Ethernet Half Duplex
OFF Nway Enable [ignore 4&5] (default)
-6
ON Nway Disable [follow 4&5, MDI-X is disabled]
OFF 802.3X Flow control disable (default)
-7
ON 802.3X Flow control enable
OFF Filter Disable [Transparent forwarding] (default)
-8
ON Filter Enable [Bridge mode]
Table 3: DIP settings for Ethernet Bridge Configuration.