EC7012_CTC_IM
21.09.17
27
Troubleshooting
Problem
Cause
Solution
The device
cannot be
operated.
The device is
blocked and
“hangs”.
Switch the device off
and disconnect the
power plug from the
socket for about 5 sec
onds. Then switch the
device on again.
No sound.
Volume is too low. Increase the volume.
No audio
signal during
bluetooth
connection.
The device is not
registered with the
audio source.
Ensure that there is a
connection. Register
the device with the
audio source again, if
necessary.
Volume too low.
Increase the volume
on the device.
Increase the volume
on the audio source.
Device can
not be con
nected.
Registration does
not work.
Check to see if the
audio source supports
the A2DP protocol.
Audio source is
shut off.
Turn on the audio
source.
Bluetooth is shut
off on the audio
source.
Turn on the Bluetooth
function on the audio
source.
Bluetooth version
is not supported.
Use a different play
back device.
Sharp
whistling
sound during
microphone
operation.
Audio feedback.
Use the microphone
outside of the speak
er’s reverberation
distance.
Technical Data
Model:..........................................................................EC 7012
Power supply:................................. AC 100 – 240 V~ 50 / 60 Hz
Battery operation: ............................................. 12 V, 4000 mAh
Charging time: ..........................................approx. 5,5 hours
Operating time: ..............................................up to 10 hours
Power consumption: .........................................................36 W
Protection class: ......................................................................
Net weight: .............................................................approx. 7 kg
Bluetooth
Bluetooth support: ................................................... V 2.1+EDR
Maximum radiofrequency power transmitted: .............2.5 mW
Range: ..........................................................approx. 15 meters
Transmitting frequency: ...............................
2.402 − 2.480 GHz
Protocols: ..........................................................A2DP / AVRCP
The right to make technical and design modifications in the
course of continuous product development remains reserved.
Notice of Directive Conformity
Hereby, CTC Clatronic International GmbH declares that the
radio equipment type EC 7012 is in compliance with Directive
2014 / 53 / EU.
The full text of the EU declaration of conformity is available at
the following internet address: www.sli24.de
In the “Download” area, please enter the model name
EC 7012.
Tested for operation in Great Britain.
Disposal
Meaning of the “Dustbin” Symbol
Protect our environment: do not dispose of elec
trical equipment in the domestic waste.
Please return any electrical equipment that
you will no longer use to the collection points
provided for their disposal.
This helps avoid the potential effects of incorrect disposal on
the environment and human health.
This will contribute to the recycling and other forms of reutili
sation of electrical and electronic equipment.
Information concerning where the equipment can be dis
posed of can be obtained from your local authority.
Disposal of Batteries
The device includes a rechargeable battery.
Used batteries do not belong in household
waste.
The battery must be removed before the prod
uct is disposed of. Contact qualified specialists
to do so.
Information on where the battery must be disposed of can be
found via your local authorities or municipalities.
