CTC Union DVS-8301, User Manual

Page: 40 / 53

34
4.4.5.2 Alarm Sending
Use this setting page to trigger the email sending in response to an alarm detected by the
external sensor input or by the built-in motion detection function.
Alarm sending
：
Select On to set up send mail in response to the alarm detection.
File attachment
：
Set whether an image file is attached to the mail sent or not. When On is
selected, the image file made by the settings below is attached. When Off is selected, only the
message is sent.
Image file name
：
Type the file name you want to assign to the image to attach a mail. You
can use up to 10 alphanumeric, - (hyphen) and _ (underscore) for naming.
Suffix
：
Select a suffix to add to the file name:
None: No suffix is added. The Image file name is assigned to the image to be sent via an
e-Mail.
Date & time: The date & time suffix is added to the Image file name. The date/time suffix
consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits), hour (2
digits), minute (2 digits), second (2 digits), and consecutive number (2 digits), thus
14-digit number is added to the file name.
Sequence number: A consecutive number of 10 digits between 0000000001 and
4294967295 and two fixed digits 00 is added to the Image file name.
Motion Detection
：
Click this to use the Motion Detection function as a trigger. You can then
setup the motion detection function page.
Note
：
• Motion Detection works only when the Video mode is set to MPEG4 and Cropping is
set to Off .