Hold
Hold lets you place a call on hold for retrieval from the same phone.
To place the current call on hold:
• Press the Hold softkey.
To retrieve the held call:
• Press the Resume softkey.
Note: When a call is placed on hold, your phone will ring once every minute to remind you that you have a held call.
Call Park
Call Park allows you to park a call and then pick up the call from any phone.
To Park a Call
• Tell the caller that you will be placing them on hold.
• Press the More soft key until the Park soft key is visible. (MCPark)
• Press the Park soft key.
• The system parks the call at a Call Park extension. The system announces the Call Park Extension and displays it on
the telephone display.
To Retrieve a Parked Call
• Lift the handset and dial the Call Park Extension of the call you wish to retrieve.
Note: If the party does NOT pick up their parked call the call will automatically ring back to the original phone that parked
the call to begin with.
Adjusting the Phone
To Adjust Display Contrast:
• Press the Settings button.
• Press 1 to select Contrast.
• Adjust the contrast using the Up/Down softkeys.
• Press the OK softkey.
• Press the Exit softkey.
To Adjust Ring Volume:
With the handset in the cradle and speakerphone off, use the Volume Up/Down buttons.
To Adjust Handset Volume:
Remove the handset from the cradle and use the Volume Up/Down buttons. Replace the handset.
To Adjust Speakerphone Volume:
Press the Speaker button and use the Volume Up/Down buttons. Press Speaker button again.
To Adjust Ring Type:
• Press the Settings button.
• Press 2 to select Ring Type.
• Highlight the desired ring with the Scroll Up/Down buttons.
• Press the Select softkey to select the ring.
• Press the OK softkey to exit the menu.
Centrex Phone Instructions (7940 & 7960 Series) Continued...
