manualshive.com logo in svg

CTC Union 380 S 18, Installation And Maintenance Instruction

Share
Download
CTC Union 380 S 18 Installation And Maintenance Instruction Download Page 41

41

 

CTC 380 S

General information

!

If none of the above mentioned actions correct the fault, we request you to contact 
your authorized installer or CTC directly.

9.8 

Operations disturbance

Burner disturbance: 

•  Check if there is oil in the tank.

Burner disturbance signal lamp lights: 

•  Check if the oil filter is dirty. Take necessary actions according to 

instructions in the technical manual of the burner. 

Boiler disturbance:

•  The safety limit thermostat has released. Reset by pressing the button 

on the power pack. See also Electrical installation.

Power supply to boiler disconnected:

•  Check the fuse on the power pack. Check if the mains switch on the 

power pack is switched on. See also Electrical installation.

Unsufficient room heating:

•  Check the settings of the Comfort-control.  

See also Electrical installation – Comfort-Contro.

Unsufficient DHW:

•  Check the settings of the Comfort-control.  

See also Electrical installation – Comfort-Contro.

Summary of Contents for 380 S 18













































Reviews:

No comments

Brands by name

Popular brands

Load more brands