5. Adjusting body rotation :
4. Setting up device and enclosure :
4A. Align the security star keys x2 (K) and insert it
one in the front screw (D) and one in the Back
screw (E) as shown.
4B. While holding the back security star key
(K) tight in place. Turn the front security star
key (K) counter clock-wise until all 4 Screws
(D) are unscrewed.
4E. While holding the back security star key (K)
tight in place. Turn the front security star key (K)
clock-wise until all 4 Screws (C) are screwed.
K
D
4C. Separate front part of enclosure (C)
as shown.
4D. Using one of the compatible listed tablets, insert into the foam adapters for a
secure and tight fit. Insert tablet in back part of enclosure (C) as shown. Watch out
orientation of tablet.
C
C
D
K
D
K
C
F
G
x4
M5 x 12
x4
M5 Nut
J
3. Attaching enclosure to main body :
I
J
A
C
3A - Align enclosure VESA holes (C) to VESA plate holes of main body (A). Using provided tool (J), rotate in screws (F) from above while holding
hex nut (G) from behind with your hands. Rotate until securely tightened.
5A. Turn Clockwise the back top screw of main body (A) with provided tool
(I) (as shown) to tighten and secure in place. Loosen as needed.
Adjustable angles :
Rotate and tilt to desired angle and position as needed.