1) Place the stand on a flat surface and orient the holder vertically,
with the fixed end at the bottom and the sliding end on top.
2) Pull back the lock catch at the rear of the holder. Place tablet corner
diagonally into the fixed clamp end, then push sliding end down until it is firmly cradling tablet.
1) Attach cable end to any permanent fixture using loop.
2) With key inside, insert lock end to slot on stand base or back of holder.
3. Turn key and remove from lock to attach cable to stand.
Using the holder
Cable management system
3) Push the lock catch back in, then turn the key to lock in place.
ATTACHED TO BASE
Fixed clamp
Key slot
Sliding clamp
Push sliding clamp
