888-733-4448
How to Insert Tablet into Case
Align the magnets. Please align the battery pack to the
battery pad on the right side so tablet will charge properly.
How to Setup Inductive Charging
Connect the AC/DC Power Supply to the charging plate as pictured.
Take care to assure that
the charging case and back
charging plate are aligned
properly. When done
properly, you’ll see the blue
indicator light up on the
back of the charging plate.
A blue indicator light tells you your
iPad is properly connected to the
inductive charging plate.
Note the power level
displayed on the iPad
screen.
1. Peel the external
silicone sleeve from
the internal hard case
2. To open internal hard
case, apply gentle pressure
to the small clips (as
shown). The case will open
with all (4) sides being
unclipped
3. Insert tablet into the back
portion of the hard cover
4. Once tablet is in the back
portion of the case, look to the
bottom and plug the charging
cable into the power socket of
the tablet. After, place the
internal hard case front cover on
the top of the case and clip all
(4) sides shut around the case.
5. Place on the external
silicone rubber sleeve over
the hard case again.
Plug Power Cable into Dock to Charge
Proper Charging Setup Indicator
**Tablet for illustration purposes and not included
B
C
C
