QUICK START GUIDE
The P330A pedometer can be setup using the default values, so for a quick setup all
you need to do is set the clock. This will provide you with average estimates for your
calories burnt and distance walked.
SETTING THE CLOCK
1)
Press the SET button to display the Clock (if you are on a different display)
2)
Press and hold SET for 2 seconds, “ADJ” will begin flashing
3)
Press SET button, 12Hr or 24Hr will flash. This is for selecting 12 Hour (am /
pm) or 24 Hour (military time)
[If the clock format shown on the display is the one you desire you can skip to step 5.
Otherwise continue to step 4]
