I N S T A L L A T I O N I N S T R U C T I O N S
Surge Protective Device (SPD) & Voltage Monitoring
Device (VMD) for Single-Phase System
Installation
1. To assure proper installation, measure the voltage on
each phase and ensure the correct device is installed.
2. Turn off power to the circuit where surge protector is to
be installed.
3. Mount device to keep conductor length as short as
possible. Cut wires to length and connect to circuit per
wiring diagram below avoiding sharp bends or looping.
4. Splice the included Rectorseal RSH60-VMD 24V
thermostat control wires into the Y1 terminal
thermostat wire.
5. Reinstall covers, restore power and confirm diagnostic
LED is illuminated.
ALTERNATIVE WIRING METHOD:
This SPD can be also be installed by splicing into the wires of the
WIP, within the disconnect box or by using a double lug adapter.
Device Ratings
Normal Voltage
Per Leg
Max. Operating Voltage
(MCOV) Per Leg
Max. Discharge
Current (IMAX)
120 VAC
150 VAC
60kA
240 VAC DIAGRAM
Split-Phase System: 1 Ph, 2W + G
240 VAC 2-Pole
Disconnect Diagram
Para instrucciones en español visite
www.rectorseal.com
Technical Support Call 1-800-648-6802
All surge protection devices require a good ground connection for effective operation
Black
Black
Green
Ground
120 VAC DIAGRAM
Single-Phase System: 1 Ph, 2W + G
BL
ACK
GREEN
BL
ACK
120 VAC
RSH-60 VMD
24 VAC
Y1
Y1
BL
ACK
GREEN
BL
ACK
RSH-60 VMD
24 VAC
Y1
Y1
240 VAC
120 VAC
120 VAC
LINE 2
LINE 1
LED VERDE
CONDICIÓN
LED ROJO
ALARMA AUDIBLE
Protección contra
sobretensiones
Sin protección contra
sobretensiones
Bajo Voltaje
Protección de ciclo corto
ENCENDIDO
APAGADO
––
DESTELLO
APAGADO
ENCENDIDO
––
––
––
––
ENCENDIDO
––
Diagnostic Operations
GREEN LED
CONDITION
RED LED
AUDIBLE ALARM
Surge Protection
No Surge Protection
Under Voltage
Short Cycle Protection
ON
OFF
––
OFF
ON
––
––
––
––
ON
LED VERT
ÉTAT
LED ROUGE
ALARME AUDITIVE
Protection Contre
Les Surtensions
Non Protection Contre
Les Surtensions
Sous Tension
Protection Du
Cycle Court
ALLUMÉ
ÉTEINDRE
––
FLASH
ÉTEINDRE
ALLUMÉ
––
––
––
––
ALLUMÉ
––
Opérations de diagnostic
Operaciones de diagnóstico
FLASH
––