CST/BERGER Magna-Trak 102, Instruction Manual, Page: 15 / 16

15
Specifi cations
Power: Six AA 1 1/2 volt batteries
Battery life: Approximately 25 hours of intermittent operation (alkaline batteries)
Output: Powerful magnetic speaker with water proof Mylar cone.
LCD Display: Numeric digital, analog Bar-graph and low battery indicator feature.
Weight: Approximately 3 lbs. (1.3kg) with batteries.
Operating temperature: 0°F to 120°F (-18°C to 49°C).
Length: 40 inches (101.6 cm.).
Construction: High impact plastic, water resistant, light weight and epoxy painted. Aluminum
sensor tube waterproof to just under the plastic case (see page 13).
Patent: United States #4,439,732.
Nominal sensor 20 inches (50.8 cm.).
Warranty
CST/berger, Robert Bosch Tool Corporation, warrants the Magna-Trak 102 against defects
in material and workmanship for a period of fi ve years from the date of purchase. Defi cient
products will be repaired or replaced at CST/berger’s discretion. For warranty and repair
information, contact you local distributor.
Before returning the instrument to CST/berger, please call (815) 432-9200 for a Return
Authorization Number from our Customer Service Department.
CST/berger’s liability under this warranty is limited to repair or replacement of the unit.
Any attempt to repair the product by other thanfactory authorized personnel will void this
warranty. Calibration, batteries and maintenance are the responsibility of the user. Where
permitted by law, CST/berger is not responsible for incidental or consequential damages.
Agents of CST/berger cannot change this warranty. CST/berger is not responsible for
damage resulting from wear, abuse, or alteration of this product. The user is expected to
follow ALL operating instructions.
This warranty may provide you with additional rights that vary by state, province or nation.
Magna-Trak 102 is a registered trademark of CST/berger.
IMPORTANT NOTE: The customer is responsible for the correct use and care of the instru-
ment. Moreover he is completely responsible for checking the job along its prosecution,
and therefore for the calibration of the instrument. Calibration and care are not covered
by warranty.
Subject to change without notice