26
|
Instructions for Use
Assist
X ABL one
8. Use of the device
The
ABL one
is connected to one of the
AssistX Port
connections
(S1 or S2) on the
AssistX Call
using the supplied cable. The device
is then immediately ready for operation.
The
ABL one
lights up and an audio signal sounds (can be switched
off) when the call system has confirmed that the call has been trig-
gered.
9. Settings
The confirmation sound can be switched on and off on the
ABL one
.
(default: switched on) By pressing the
1
button for more than 5 sec,
the sound is switched off (the
2
LED lights up briefly once, beeps
once). To switch on, press the
1
button for more than 5 sec: the
sound is switched on (the
2
LED lights up 2x and beeps 2x).
