The Rasul program runs for 30 minutes. Once the Rasul program starts, a countdown
time is displayed on the interface as shown in picture 1 from 30minutes to 0 minutes.
Touch the “ “ button to start the Rasul program. The steam generator will
immediately fill with water and begin to heat. At this time the normal lights are on
and will stay of for the first 5 minutes.
There after the normal lights will turn of and the steam will continue to for 25minutes.
At 25 minutes steam production will stop and the overhead sprayers will spray water
for 5 minutes and then stop.
At this time the normal lights will switch on, indicating the end of the session.
The normal lights will remain on until the on/of button is pressed.
GS08M2 USER MANUAL
GS08M2 USER MANUAL
The RASUL Session Explained
Switching from Celsius to Fahrenheit
Enter the interface as shown in picture 6 by pressing the “ “ button.
Now select the “ “ column and press the “ “ button to enter the interface as
shown in picture 5.
Now press the “ “ button to change from Celsius to Fahrenheit.
OK
OK
Restore Factory Settings
OK
OK
Enter the interface as shown in picture 6 by pressing the “ “ button.
Now select the “ “ column and press the “ “ button to enter the interface.
Now press the “ “ button to restore factory settings.
Real Clock
Enter the interface as shown in picture 6 by pressing the “ “ button.
Now select the “ “ column and press the “ “ button to enter the interface
as shown in picture 7.
Now press the “ and “ button to the data you would like to set, such as hour,
minute, date, month and year.
Press the and buttons to adjust the data. Press“ “ to save your settings
and press “ Exit “ to exit settings.
OK
OK
Trouble Shooting
Error Code information
Technical Parameters
Please check the water supply, and if there
are any obstructions in the inlet valve.
Please check if the tank is burning dry.
Please check the sensor cable connections.
If there are no problems, replace sensor.
Please check the sensor cable connections.
If there are no problems, replace sensor.
Please check the sensor cable connections.
If there are no problems, replace sensor.
High-Limit
Water Inlet Problem
External Temp Sensor
Short Circuit
Temp Sensor
Open Circuit
Temp Sensor
Short Circuit
Error Code
Possible Cause
Trouble-shooting Method
03
05
07
08
09
Steam starts and
normal light works
for 5 minutes
normal light off and
steam continues for
20 minutes
Steam off and
Sprayers work for
5 minutes
Normal light
switches on after
30 minutes
Rasul program duration is 30 minutes
Page 3
Page 4
