CSO POLARIS Instructions For Use Manual Download Page 10 | Manualshive

Page: 10 / 48

CSO POLARIS Instructions For Use Manual Download Page 10

INSTRUCTIONS FOR USE

POLARIS | IFU312EN00

This document is the property of
CSO Costruzione Strumenti Oftalmici srl.
Any reproduction, even partial, it is prohibited.

8/44

2

SAFETY

2.1

SAFETY WARNINGS

DANGER

Electric shock danger. Do not let water fall on the device. Do not

immerse the device in water or other liquids.

DANGER

Electric shock danger. If the power cables are damaged they must

be replaced in an Authorized Service Center to prevent any risk.

DANGER

Electric shock danger. Unplug the power cable from the mains

socket before disinfecting the device and before any maintenance

operation.

CAUTION

Do not use the device if visibly damaged. Periodically inspect the

device and the connection cables to verify if there are damage

signs.

CAUTION

Always keep the device out of the reach of children.

CAUTION

Danger of device fall down. Do not leave free cables which can

represent an obstacle or a danger for the patient or the operator.

CAUTION

Danger of stumbling and falling. Do not let the power cord or the

connection cables free in a place where people could walk.

CAUTION

Electric shock risk. Do not touch the power supply cables with wet

hands.

«
...
8
9
10
11
12
...
»

Summary of Contents for POLARIS

















































Reviews:

No comments