1. For first time use, charge the battery pack
to the refrigerator/freezers 12V AC/DC
power supply for at least 3 hours.
2. Refrigerator/freezer battery protection
must be set to low.
3. Battery life will be increased if
compressor mode on refrigerator/
freezer is set to “ECO”
4. The portable battery pack can be
charged and power the refrigerator/
freezer at the same time.
(For California Residents)
WARNING: These products can expose you to chemicals including LEAD and DEHP which are known to the state of California to cause cancer and
birth defects or other reproductive harm. For more information go to www.P65WARNINGS.CA.GOV. Wash hands following installation or handling.
DANGER
• Do not plug input to output connector
• Do not put the portable battery charger pack into water or get it wet
• Do not charge or store near fire or under extreme heat
• Do not mix up positive and negative electrode or cross wires
• Do not connect directly to AC power
• Do not transport or store with metal material of any kind
• Do not puncture, open, stamp or impale
• The terminals cannot be welded directly
• Do not dispose of in landfill
• Do not place in microwave ovens or pressure vessels
• Do not combine with one-shot battery or any other battery type
• Do not use if unit is damaged
4. TROUBLESHOOTING
1. “F1” code display on refrigerator/freezer - car battery protection enabled due to low
voltage. Set car battery protection from high to low. Charge the pack if it is low on
voltage or flat.
2. The refrigerator/freezer is not working - Charge the pack if it is low on voltage or
flat. Make sure the power cable of the pack is tightly connected with the
refrigerator/freezer socket.