Page 6
Fiberlink® 8200 Series User’s Manual
Fiberlink® 8200 Series
Alarm Switch Settings & Options
The Rack Card version of this product has an additional red indicator LED that illuminates
when an alarm condition exists. The rack card unit also provides an output to drive a model
6020A Alarm Sensing Module which provides an audible tone and activates a set of
contacts for external signaling purposes.
Alarm Switch Settings | Part Numbers/Wavelengths
z: S
ST Connector
L
LC Connector
w: 7
Standard 1310nm FP laser
A
1310nm DFB laser
B
1330
C
1350
D
1370
E
1390
F
1410
G
1430
H
1450
I
1470
J
1490
K
1510
L
1530
M 1550
N 1570
O 1590
P
1610
Alarm Switch Settings for the 8200 Series Card
Switch Position
Alarm Indication
On
Off
1
Loss of BNC Input Video Enabled
Disabled
or Optical Signal
2
N/A
N/A
N/A
Note: The detection of the loss of input video or optical signal is dependent upon the position of the
input selection switch. Whichever input is selected, only that input will be monitored by the alarm circuit.
Part Numbers & Wavelength Identification
Part Number
Description
Fiber Outputs
8201-xzw
One Output Optical Distribution Amp
1
8202-xzww
Two Output Optical Distribution Amp
2
8203-xzwww
Three Output Optical Distribution Amp
3
8204-xzwwww
Four Output Optical Distribution Amp
4
Part Number Suffix Codes:
x: B
Box Version
C
Card Version
