Page 7
Fiberlink® 3353 Series User’s Manual
Fiberlink® 3353 Series
Receiver LEDs
LED
Status
Definition
Power
On
Indicates that correct power has been applied.
3G Rate
Off
Indicates no 3G-SDI data rate lock
On
Indicates 3G-SDI data rate lock at 2.97 Gbps or
2.97/1.001 Gbps
HD Rate
Off
Indicates no HD-SDI data rate lock
On
Indicates HD-SDI data rate lock at 1.485 Gbps or
1.485/1.001 Gbps
ED Rate
Off
Indicates no ED resolution data rate lock
On
Indicates ED resolution data rate lock
at 540 Mbps
SD Rate
Off
Indicates no SD-SDI or DVB-ASI data rate lock
On
Indicates SD-SDI or DVB-ASI data rate lock
at 270 Mbps
Alarm
On
Loss of optical signal
Note: The 3G, HD, ED and SD LEDs indicators are off when a non-standard signal is applied.
Rotary Switch Positions
Position
Function
0
Will mute the audio output
1 through 8 Will output the respective audio channel pair on the HDMI cable
and the audio output connectors
9
Not used
Indicator LEDs
The Fiberlink® 3353 Series has six integral indicator LEDs that are used to monitor the state
of the unit.
Audio Pair Selection
The Fiberlink® 3353 Series has a rotary dial switch that allows you to select which audio pair
to output. The chart below describes the operation of the rotary switch positions:
Audio Pair Selection | LED Indicators
