CSI CSI-DSP85-250-AW, Product Manual

Page: 12 / 40

-12 -
Mounting the Digital Repeater
The following diagrams illustrates the methods for mounting the repeater(s) in a typical wall or rack installation.
Brackets are provided for both options. Note: Dual and single band modules are shown for illustration purposes.
Rack mount of the repeaters requires just two brackets mounted to the front corners of each module. Note: the CSI digital repeaters
must be supported in the rack system with a shelf or slide rail.
Do not rely on the brackets exclusively to support all the
weight of the modules.
Mount the Cross Band Coupler on the wall close enough
to the repeater modules to allow the RF jumpers to reach
from the CBC to the repeaters. The attachment system
used to anchor the CBC to the wall must be able to
support at lease 8.4 lbs / 3.8 kg.
The wall anchoring system you use for the repeaters
will need to be able to support at lease 39.2 lbs/ 17.8
kg for each dual band module and 23.2 lbs/ 10.5 kg for
each single band add on module. The power supplies
are mounted approxamately as shown.