35
So for example, from the information shown at the CSI site, the latest configuration of a
radio would be:
Firmware Version: 1.01.03
Boot Loader Version: 2.01
So for this example, the information obtained from reading the information from the
radio shows that the radio is at the current configuration, so no updates are required. If
the radio had shown a firmware update listed in one of the earlier release dates, or a
lower version of the Boot Loader, the radio requires an update.
To determine the version of the CPS software you have, launch the CPS software, click
on the Help located on the top menu ribbon, then click the About, you should see a pop
up like below showing the version you have.
If the CPS upgrade is required, do the translate of your current code plug, it will create a
new code plug with a slightly different file name. DO NOT attempt to load the translated
code plug into the radio until you have completed the actual firmware updates.
To aid in keeping things straight, I create a file folder on my computer to download the
firmware updates to work out of.
Firmware Update Procedure
Locate the FlashBurn file you downloaded. Should look something like the file below:
