Page 6
Copperlink™ 2353 Series User’s Manual
Copperlink™ 2353 Series
Figure 1:
Power Connector
DC Input Polarity
9-24 Volts
AC or DC
(+) Positive
( - ) Negative
Installation Instructions
The Copperlink™ 2353 Series of 3G/HD/SD-SDI converters are ready for immediate use and
do not require any special tools.
The following procedure presumes you have followed the instructions for installing your
converter unit.
The following instructions describe the typical installation procedure:
1) Connect the SDI coax cable to the SDI input BNC connector of the converter unit.
2) Connect the video output cable (HDMI®) to the video output HDMI® connector on
the converter.
3) Optionally connect any audio cables and using the channel pair rotary selector,
choose your desired audio output channel. Audio is also embedded on the
HDMI® cable.
4) Terminate any unused BNC output connector at 75 Ohms.
5) Connect the Universal Power Supply to the converter.
Please refer to figure 1.
6) When power is applied, the green POWER LED should illuminate, indicating the
presence of operating power. The 3G/HD/SD RATE LED will give an indication as
described in the Indicator LED’s and Alarm Circuitry section of this manual.
7) The system should now be operational.
Installation Instructions
