background image

MA REV A

3

SAFETY GUIDELINES

 

GROUNDING

This amplifier system is designed to operate from single-phase 120VAC power and should

always be operated with both the neutral and ground wires properly connected.  Do not
remove or otherwise alter the grounding lug on the power cord.

 

EXPLOSIVE ATMOSPHERES

This product has an integral circuit breaker, which may cause an electrical flash if the

breaker should reset.  To avoid explosion or fire, do not operate this product in the presence of
flammable gases or fumes.

 

LIGHTNING DANGER

Do not install or make adjustments to this unit during an electrical storm.

 

NO USER SERVICEABLE PARTS INSIDE

HAZARDOUS VOLTAGES ARE PRESENT WHEN THE COVER IS REMOVED.

Opening the chassis will void your warranty.  If you suspect a malfunction with this product, call
your dealer or the Cellular Specialties Support Line at (603) 626-6677.

The general safety information in this guideline applies to both operating
and service personnel.  Specific warnings and cautions will be found in
other parts of this manual where they apply, but may not appear in this
summary.  Failure to comply with these precautions or specific warnings
elsewhere in the manual violates safety standards of design,
manufacture, and intended use of equipment.  Cellular Specialties, Inc.
assumes no liability for the customer's failure to comply with these
requirements.

1.0

Summary of Contents for 310 Plus













Reviews: