CSI Wireless ABX-3, Reference Manual

Page: 73 / 113

ABX-3 / MBX-3 Reference Manual 53
When interfacing a Garmin GPS receiver with the
MBX-3, set the input/output protocols to RTCM/NMEA and change the
baud rate of the Garmin to 4800.
4.8 Configuring the Receiver
The following subsections provide detailed instructions to configure
important operating parameters of the MBX-3.
4.8.1 Change Baud Rate
To modify the baud rate of the MBX-3 data port (Refer to Figure 4-4):
n
Navigate to
Options
in the
Setup
menu and press .
n
Observe the current
Baud Rate
setting. If incorrect, press .
n Scroll with the or keys to the correct baud rate {2400, 4800, or
9600} and press .
4.8.2 Change Frequency and MSK Rate
To modify the frequency and MSK rate to which the receiver is
manually tuned (Refer to Figure 4-4):
n
Navigate to
Tune
in the
Setup
menu and press .
n Scroll with the or keys until the desired Frequency and MSK
Rate are displayed and press {283.5/100 to Auto/Auto}.
4.8.3 Select a Beacon By Name
To tune to a specific beacon by name (Refer to Figure 4-4):
n
Navigate to the
Select Beacon
in the
Setup
menu and press .
n
Scroll with the or keys until the desired continent is displayed
then press .
n Scroll with the or keys until the desired country is displayed then
press .
n Scroll with the or keys until the name of the specific beacon is
displayed then press .