86
NetVision Plus/Elite and Micro DVR v2.3
SP2
User's Guide
21-0400E v2.3.3
Select a desired type of recording, and then
use the [Up] or [Down] button to change its
position. Select [Default] to return to the
factory settings (the order as shown here):
Alarm Recording:
A recording triggered by:
•
Motion being detected in a camera-view;
•
The external sensor associated with a
camera being 'tripped';
•
Video signal being
lost;
Pre-Alarm Recording:
An on-going short
recording that allows a recording of the scene
to be available just before an alarm-triggered
recording occurred;
Instant Recording:
This is a recording
started manually by someone who is logged in
at a Video Server or remote station;
Scheduled Recording:
This is a recording
started automatically based on a schedule.
Related Topics: To follow/below.
17.2.5
Misc.
You allows setting some miscellaneous
features.
Enable Instant Recording Hot-Key:
This
determines whether or not recording can be
started by double-clicking a camera/view
during sequential viewing.
Alternative:
You can also start a manual/instant
recording by selecting the camera "ID" number under
"Recording" (on the right-hand side of the Video Server
desktop).
Enable Instant Playback:
This determines
whether or not a manual/instant or scheduled
recording can be interrupted for immediate
playback.
Note:
Playing a file while it is being recorded closes
the present file (to allow it to be played-back), and starts
a new recording file. Alarm recordings cannot be
interrupted in this way.
Related Topics:
7
Playing or Downloading Video Recordings
9 Recording
Camera-Views
17.1 Video Setup (in DSR Configuration)
17.3 Resolution and Recording Mode
25.2 Camera and PTZ Reference
28.1 The Video Playback Feature (Micro DVR)
Summary of Contents for NetVision Plus
