CSE SCSR TRAINING
December
2011 Do not remove or discard this page.
34
This
page is
important
for
Disinfect
1
Disinfect the breathing bags, mouthpieces, mouthpiece
plugs, breathing hoses, snapper clamps, threaded
hose connectors with gaskets, and nose clamps using
Airkem
A
-33 or an equivalent disinfectant.
2
Mix the disinfectant with warm water (no hotter
than 110°
F
), according to the manufacturer’s
recommendations, in a clean container.
3
Soak the components (breathing bags, mouthpieces,
mouthpiece plugs, breathing hoses, snapper clamps,
threaded hose connectors with gaskets, and nose clamps)
in the disinfectant solution for at least 10 minutes.
4
Rinse the components in clean, warm (no hotter than
110° F) water to remove all traces of disinfectant.
5
If you plan to reuse the components immediately,
remove the excess water and hand-dry them.
6
If you plan to store the components, air-dry them
before placing them in storage. Store them in sealed
transparent bags or containers, marked with the
words “Used and Disinfected” and the date they
were placed in storage.
Training with the
SR-T
S
AFET
Y PERSONNEL
|
MINERS
|
TRAINERS
