www.cs-lab.eu
CS-Lab s.c. | CSMIO-ENC module for threading
3
1.
General
The
CSMIO-ENC
is an expansion module for threading and it’s used to connect spindle encoder.
It can
be used with CSMIO/IP
-S
(step/dir)
and CSMIO/IP
-A
(+/
-
10V)
Ethernet Motion Controllers
.
1.1
Signs used in this guide
Potential danger, possible risk of injury.
Useful information, tips
Warning, failure to comply with these warnings may lead to inappropriate functioning or
damage to the device
1.1
Content of the package
In
the
CSMIO-ENC
module
package
you
will
get:
1x DB25 flat cable
1x DB9 flat cable
1x DB25 connector
-
> terminal block.
1x terminator
1.2
Standards compliance
CSMIO-
ENC modules were designed and made in accordance with
the national and international
standards
for industrial control systems based on electronic components:
•
Detailed requirements for programmable controllers: working characteristics, shock
resistance, safety
etc. EN61131
-
2 (IEC1131
-
2), CSA 22.2, UL508
•
Compliance
with
European
Guidelines
(low
voltage, the level of
electromagnetic interference
Electromagnetic Compability
), the CE marking.
•
Electrical
and
non
-
combustible
properties of
insulation materials: UL 746C, UL 94, etc.
•
The Product made in lead
-
free technology, RoHS compliant.
