8
6. Drive Mode
Drive Mode = adjustable mode for the use of the reverse function. 5 differ
-
ent settings can be done:
Forward/Break
- forward and brake, no reverse (for
races)
Forward/Break/Reverse
- forward, brake and reverse.
Moving the throttle trigger to full brake the first time,
the car will brake, moving the throttle trigger the second
time, the car drives revers.
Forward /S-Break/Reverse
- forward, security brake and
reverse: Moving the throttle trigger to full brake the first
time, the car will brake, moving the throttle trigger the
second time, the car will brake until it stops and then it
drives reverse.
Forward / Break / 1s Reverse
- forward, brake and
after a second reverse. Moving the throttle trigger to
full brake, the car brakes and after 1 second it drives
reverse.
Forward / S-Break / 1s Reverse
- forward, security brake
and after a second reverse. Moving the throttle trigger
to full brake, the car brakes and after 1 second the car
will brake until it stops and then it drives reverse.
7. Motor Timing
Motor Timing = setting of the timing of the motor. Selectable are 4 different
settings:
Automatic
- The timing is adjusted by the speed control
-
ler automatically to the driving situation.
max. Torque - The timing is adjusted by the speed con
-
troller automatically to maximum torque.
medium Standart
- The timing is adjusted by the speed
controller automatically to an even relationship be
-
tween torque and rotational speed.
max. Speed
- The timing is adjusted by the speed con
-
troller automatically to maximum speed.
8. Battery Cut off
Undervoltage switching off = The controller switches off to protect the
battery against damage.
NiMH 4.5 V
- recommended for 6 or more NiMH-cells.
NiMH 4.2 V
- recommended for a battery with 5 NiMH-
cells.
NiMH 3.9 V
- recommended for a battery with 4 NiMH-
cells.
Lipo Save Run - switch off at 3,7 Volt per cell.
Lipo Standard
- switch off at 3,5 Volt per cell.
Lipo Race - switch off at 3,2 Volt per cell.
Finishing the Programming
After the setting of all programs you can use the speed controller.
Please note: After each program selection the gear ratio has to be exactly
adjusted and must be checked after a short running time with the tempera
-
ture of the brushless motor. It is sufficient to strongly grasp the motor with
three fingers. If you can hold the motor for appr. 4 seconds tight, it is o.k. If
not, the temperature is raised over 65 °C. In this case you have to change
the gear ratio immediately by using a smaller pinion to avoid any serious
damage or destruction of one of the components.
Launch
Control
Power-
Program
Automatic
Brake
Break
Power
Reverse
Power
Drive
Mode
Motor
Timing
Battery
Cut-Off
Press the key for the
function and after
that, press the key
(number) for the
value
Launch
Control
Power-
Program
Automatic
Brake
Break
Power
Reverse
Power
Drive
Mode
Motor
Timing
Battery
Cut-Off
Press the key for the
function and after
that, press the key
(number) for the
value
Launch
Control
Power-
Program
Automatic
Brake
Break
Power
Reverse
Power
Drive
Mode
Motor
Timing
Battery
Cut-Off
Press the key for the
function and after
that, press the key
(number) for the
value
1
2
3
4
1
2
3
4
5
6
1
2
3
4
5