TROUBLESHOOTING
Due to the individual characteristics of your pool, some adjustment may be required
to get the best possible performance from your pool cleaner. The following tips will
help you to optimize the performance of your cleaner.
Problem
Solution
Pool cleaner does not move, or moves slowly.
•Make sure the main drain is closed.
•Check the Flow Control Valve and make sure the flow to
pool cleaner is sufficient.
•Check diaphragm for wear or damage.
•Backwash filter and empty pump strainer basket.
Pool cleaner gets stuck at steps or in a corner.
•Fit Deflector Wheel.
•Make sure total hose length is correct.
•Adjust return line eyeball fittings to use the water flow to
help guide away from the steps or corner.
Pool cleaner moves in a repetitive, non-random
pattern.
•Make sure return line fittings are directed downwards.
•Check that hose weight position is correct.
•Make sure total hose length is correct.
Pool cleaner stays in only one end of the pool.
•Check the return line flow and redirect if necessary.
•Check the total hose length and add more hose if
necessary.
•Check that hose weight position is correct.
Air bubbles can be seen in the flow from the
return line.
•Check the hose to ensure there are no leaks.
•Check the connection of the flow Control Valve, to make
sure it is underwater at all times.
•Check the pump basket lid is fitted correctly, is not loose
or cracked and that no o-rings are worn or missing. If
necessary, contact your pool professional for assistance.
Pool cleaner falls on its side.
•Make sure the Outer Extension Pipe swivels freely.
Hose won't fit Flow Control Valve
•Fit Hose Adaptor to Flow Control valve
ROUTINE MAINTENANCE
To maintain the performance of your pool cleaner:
•When removed from the pool, make sure the hose is stored straight.
Never coil the hose
as this may cause distortion which may adversely effect the pool cleaner.
•Remove the Pool cleaner (including hose) before chemical treatment. Wait a minimum of
4 hours after super chlorination (shock treatment) of your pool before re-installing the
pool cleaner.
•Clean the filter, skimmer basket and pump basket regularly.
•When not in use, keep the cleaner disc flat, to avoid risk of warping.
•Periodically inspect your pool cleaner for signs of wear. If necessary, replace any worn
parts.
NOTE: Due to the harsh conditions in which your cleaner operates, its colours may fade
and discolor overtime.
PAGE 6
